 English |
|
|
|
|
|
|
|
| 4066 Datasheet, PDF (4/7 Pages) Unisonic Technologies – QUAD BILATERAL SWITCH | |||
| |||
| ◁ |
4066
CMOS IC
 AC ELECTRICAL CHARACTERISTICS (AC Parameters are guaranteed by DC correlated testing)
(TA=25â, tR=tF=20 ns and VSS=0V unless otherwise)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Propagation Delay Time Signal
Input to Signal Output
Propagation Delay Time
Control Input to Signal
Output High Impedance to
Logical Level
TPHL, TPLH
VC=VDD, CL=50pF, (Figure1)
RL=200k
VDD=5V
VDD=10V
VDD=15V
tPZH, tPLZ
RL=1.0kâ¦, CL=50pF
(Fig. 2, 3)
VDD=5V
VDD=10V
VDD=15V
25 55
15 35 ns
10 25
125
60 ns
50
Propagation Delay Time
Control Input to Signal
Output Logical Level to
High Impedance
RL=1.0kâ¦, CL=50pF
(Fig. 2, 3)
VDD=5V
VDD=10V
VDD=15V
125
60 ns
50
Sine Wave Distortion
Frequency Response -Switch
âONâ (Frequency at-3dB)
Feedthrough - Switch âOFFâ
(Frequency at â50 dB)
tPHZ, tPLZ
VC=VDD=5V, VSS= -5V
RL=10kâ¦, VIS=5VP-P, f=1kHz, (Fig. 4)
VC=VDD=5V, VSS= -5V
RL=1kâ¦, VIS=5Vp-p
20 Log10 VOS/VOS (1kHz)-dB (Fig. 4)
VDD=5.0V, VCC=VSS= -5.0V, RL=1kâ¦,
VIS=5.0VP-P, 20Log10, VOS/VIS= -50dB,
(Fig. 4)
0.1
%
40
MHz
1.25
Crosstalk Between Any Two
Switches(Frequency at-50dB)
Crosstalk; Control Input to
Signal Output
VDD=VC(A)=5.0V; VSS=VC (B)=5.0V,
RL=1kâ¦, VIS(A)=5.0VP-P, 20Log10,
VOS(B)/VIS (A)= -50dB (Fig. 5)
VDD=10V, RL=10kâ¦, RIN=1.0kâ¦,
VCC=10V Square Wave, CL=50pF
(Fig. 6)
0.9
MHz
150
mVp-p
Maximum Control Input
RL=1.0kâ¦, CL=50pF, (Fig. 7)
VOS (f) =1/2Vos (1.0kHz)
VDD=5.0V
VDD=10V
VDD=15V
Signal Input Capacitance
CIS
Signal Output Capacitance
COS
VDD=10V
Feedthrough Capacitance
CIOS VC=0V
Control lnput Capacitance
CIN
Note 1: These devices should not be connected to circuits with the power âONâ
6.0
8.0
MHz
8.5
8.0
pF
8.0
pF
0.5
pF
5.0 7.5 pF
Note 2: In all cases, these is approximately 5pF of probe and jig capacitance in the output; however, this capacitance
is included in CL wherever it is specified.
Note 3: VIS is the voltage at the in/out pin and VOS is the voltage at the out/in pin. VC is the voltage at the control
input.
Note 4: Conditions for VIHC: (a) VIS=VDD, IOS=standard B series IOH. (b) VIS=0V, IOL=standard B series IOL
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 7
QW-R502-009.D
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese