4053 Datasheet, PDF (4/7 Pages) Unisonic Technologies – TRIPLE 2-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS

4053
CMOS IC
„ DYNAMIC ELECTRICAL CHARACTERISTICS
(C_L = 50pF, T_A=25°C, V_EE≦V_SS, unless otherwise specified)
PARAMETER
SYMBOL ^VDD-VEE
V_DC
TEST CONDITIONS
MIN TYP MAX UNIT
Propagation Delay Times
5 t_PLH, t_PHL =(0.17 ns/pF)C_L + 16.5ns
25 65 ns
Switch Input to Switch
Output (R_L = 10 kΩ)
t_PLH, t_PHL
10 t_PLH, t_PHL =(0.08 ns/pF)C_L + 4.0ns
15 t_PLH, t_PHL =(0.06 ns/pF)C_L + 3.0ns
8.0 20 ns
6.0 15 ns
Inhibit to Output
t_PHZ, t_PLZ
t_PZH, t_PZL
5 _{(RL=10kΩ, VEE=VSS), Output “1” or}
10 “0” to High Impedance, or High
15 ^{Impedance to “1” or “0” Level}
275 550 ns
140 280 ns
110 220 ns
5
300 600 ns
Control Input to Output
t_PLH, t_PHL
10 R_L = 10kΩ, V_EE = V_SS
120 240 ns
15
80 160 ns
Total Harmonic Distortion
THD
10 R_L = 10KΩ, f = 1 kHz, V_IN = 5 V_PP
0.07
%
Bandwidth
BW
10 ^{RL=1kΩ, VIN= 1/2(VDD-VEE) p-p,}
C_L =50pF, 20 Log (V_OUT/V_IN)= -3dB)
17
MHz
Off Channel Feedthrough
Attenuation
10 ^{RL=1KΩ, VIN = 1/2(VDD-VEE) p-p}
f_IN = 55MHz
-50
dB
Channel Separation
10 ^{RL = 1kΩ, VIN = 1/2 VDD-VEE)p-p}
f_IN = 3MHz
-50
dB
Crosstalk, Control Input to
Common O/I
10 ^{R1 = 1kΩ, RL = 10kΩ Control}
t_TLH = t_THL = 20ns, Inhibit = V_SS
75
mV
Note: 1. Data of “TYP” is intended as an indication of the IC’s potential performance.
2. For voltage drops across the switch(ΔV_SW)>600mV (>300mV at high temperature), excessive V_DD current
may be drawn, i.e. the current out of the switch may contain both V_DD and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 7
QW-R502-036.D