|
4053 Datasheet, PDF (3/7 Pages) Unisonic Technologies – TRIPLE 2-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS | |||
|
◁ |
4053
CMOS IC
 ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
DC Supply Voltage (Referenced to VEE, VSSâ§VEE)
VDD
-0.5 ~ +18
V
Input or Output Voltage (DC or Transient)
(Referenced to VSS for Control Inputs and VEE for Switch I/O)
VIN, VOUT
-0.5 ~ VDD +0.5
V
Input Current (DC or Transient), per Control Pin
IIN
±10
mA
Switch Through Current
ISW
±25
mA
Power Dissipation
Derating above 65°C
500
mW
PD
7
mW/°C
Junction Temperature
TJ
125
°C
Operating Temperature
TOPR
-40 ~ +125
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
 ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX
SUPPLY REQUIREMENTS (Voltages Referenced to VEE)
Power Supply Voltage Range
VDD VDD â 3â§VSSâ§VEE
3
18
Quiescent Current per
Package
VDD=5V
VDD=10V
VDD=15V
Control Inputs: VIN = VSS or VDD
IQ Switch I/O: VEE â¦VI/O â¦VDD,
ÎVSWâ¦500mV (Note 2)
0.005
5
0.010 10
0.015 20
Total Supply Current
(Dynamic Plus Quiescent,
Per Package)
VDD=5V
VDD=10V
VDD=15V
ID(AV)
TA=25°C only (The channel
component, (VIN-VOUT)/RON, is
excluded)
(0.07 µA/kHz) f + IQ
(0.20 µA/kHz) f + IQ
(0.36 µA/kHz) f + IQ
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE)
Recommended PeakâtoâPeak Voltage
Into or Out of the Switch
VI/O Channel On or Off
0
VDD
Recommended Static or Dynamic
Voltage Across the Switch (Note2)
ÎVSW Channel On
0
600
Output Offset Voltage
VDD=5V
VO(OFF) VIN = 0V, No Load
ÎVSWâ¦500mV
10
250 1050
ON Resistance
VDD=10V
VDD=15V
ÎON Resistance Between VDD=5V
RON VIN = VIL or VIH (Control), and
VIN = 0 to VDD (Switch)
120
500
80
280
25
70
Any Two Channels in the
Same Package
VDD=10V
VDD=15V
ÎRON
10
50
10
45
OffâChannel Leakage Current
VIN = VIL or VIH (Control)
IOFF Channel to Channel or Any One
Channel, VDD=15V
±0.05 ±100
Capacitance, Switch I/O
CI/O Inhibit = VDD
10
Capacitance, Common O/I
CO/I Inhibit = VDD
17
Capacitance, Feedthrough
Pins Not Adjacent
0.15
(Channel Off)
CI/O Pins Adjacent
0.47
CONTROL INPUTS â INHIBIT A, B, C (Voltages Referenced to VSS)
VDD=5V
2.25
1.5
Low Level Input Voltage VDD=10V VIL RON= per spec, IOFF = per spec
4.50
3.0
VDD=15V
6.75
4.0
VDD=5V
3.5
2.75
High Level Input Voltage VDD=10V VIH RON= per spec, IOFF = per spec 7.0
5.50
VDD=15V
11
8.25
Input Leakage Current
ILEAK VIN= 0 or VDD, VDD=15V
±0.00001 ±0.1
Input Capacitance
CIN
5.0
7.5
UNIT
V
µA
µA
µA
µA
µA
µA
VPP
mV
µV
â¦
â¦
â¦
â¦
â¦
â¦
nA
pF
pF
pF
Pf
V
V
V
V
V
V
µA
pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 7
QW-R502-036.D
|
▷ |