4052 Datasheet, PDF (4/6 Pages) Unisonic Technologies – DIFFERENTIAL 4-CHANNEL ANALOG MULTIPLEXERS/ DEMULTIPLEXERS

4052
CMOS IC
„ DYNAMIC ELECTRICAL CHARACTERISTICS
(C_L = 50pF, T_a=25°C, V_EE≦V_SS, unless otherwise specified)
PARAMETER
SYMBOL ^VDD–VEE
TEST CONDITIONS
MIN
Vdc
Propagation Delay Times
Switch Input to Switch
Output (R_L = 10 kΩ)
t_PLH, t_PHL
5 t_PLH, t_PHL =(0.17 ns/pF)C_L + 21.5ns
10 t_PLH, t_PHL =(0.08 ns/pF)C_L + 8.0ns
15 t_PLH, t_PHL =(0.06 ns/pF)C_L + 7.0ns
Inhibit to Output
t_PHZ, t_PLZ
t_PZH, t_PZL
5 (R_L=10kΩ, V_EE=V_SS)
10 Output “1” or “0” to High Impedance,
15 or High Impedance to “1” or “0” Level
TYP MAX UNIT
30 75 ns
12 30 ns
10 25 ns
300 600 ns
155 310 ns
125 250 ns
5
325 650 ns
Control Input to Output
t_PLH, t_PHL
10 ^RL ^{= 10 kΩ, V}EE ^{= V}SS
130 260 ns
15
90 180 ns
Total Harmonic Distortion THD
10 R_L = 10KΩ, f = 1 kHz, V_IN = 5 V_PP
0.07
%
Bandwidth
BW
10 ^{RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p,}
17
MHz
C_L = 50pF, 20 Log (V_OUT/V_IN) = -3dB)
Off Channel Feedthrough
Attenuation
10 ^{RL=1KΩ, VIN = 1/2 (VDD–VEE) p–p}
f_IN = 30MHz
-50
dB
Channel Separation
10 ^{RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p}
f_IN = 3MHz
-50
dB
Crosstalk, Control Input to
Common O/I
10 ^{R1 = 1kΩ, RL = 10kΩ Control}
t_TLH = t_THL = 20ns, Inhibit = V_SS
75
mV
Note: 1. Data of “TYP” is intended as an indication of the IC’s potential performance.
2. For voltage drops across the switch(ΔVsw)>600mV (>300mV at high temperature), excessive V_DD current
may be drawn, i.e. the current out of the switch may contain both V_DD and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-013.D