4052 Datasheet, PDF (3/6 Pages) Unisonic Technologies – DIFFERENTIAL 4-CHANNEL ANALOG MULTIPLEXERS/ DEMULTIPLEXERS

4052
CMOS IC
„ ABSOLUTE MAXIMUM RATING
PARAMETER
DC Supply Voltage (Referenced to V_EE, V_SS≧V_EE)
SYMBOL
V_DD
RATINGS
-0.5 ~ +18
UNIT
V
Input or Output Voltage (DC or Transient)
(Referenced to V_SS for Control Inputs and V_EE for Switch I/O)
V_IN, V_OUT
-0.5 ~ V_DD +0.5
V
Input Current (DC or Transient), per Control Pin
I_IN
±10
mA
Switch Through Current
I_SW
±25
mA
Power Dissipation
Derating above 65°C
700
mW
P_D
7
mW/°C
Junction Temperature
T_J
125
°C
Operating Temperature Range
T_OPR
-40 ~ +125
°C
Storage Temperature Range
T_STG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„ ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
SUPPLY REQUIREMENTS (Voltages Referenced to V_EE)
Power Supply Voltage Range
V_DD ^VDD ^{– 3≧V}SS^≧VEE
3
18 V
Quiescent Current per
Package
V_DD=5V
V_DD=10V
V_DD=15V
Control Inputs: V_IN = V_SS or V_DD
I_Q ^{Switch I/O: V}EE ^≦VI/O ^≦VDD^{, and}
ΔVsw≦500mV(Note 2)
0.005 5 µA
0.010 10 µA
0.015 20 µA
Total Supply Current
(Dynamic Plus Quiescent,
Per Package)
V_DD=5V
V_DD=10V
V_DD=15V
I_D(AV)
T_a=25°C only (The channel
component, (V_IN-V_OUT)/R_ON, is
excluded.)
(0.07 µA/kHz) f + I_Q µA
(0.20 µA/kHz) f + I_Q µA
(0.36 µA/kHz) f + I_Q µA
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to V_EE)
Recommended Peak to Peak Voltage
Into or Out of the Switch
V_I/O Channel On or Off
0
V_DD V_PP
Recommended Static or Dynamic
Voltage Across the Switch (Note2)
ΔVsw Channel On
0
600 mV
Output Offset Voltage
ON Resistance
ΔON Resistance Between
Any Two Channels in the
Same Package
V_DD=5V
V_DD=10V
V_DD=15V
V_DD=5V
V_DD=10V
V_DD=15V
V_O(OFF)
R_ON
ΔR_ON
V_IN = 0V, No Load
ΔVsw≦500mV (Note2)
V_IN = V_IL or V_IH (Control), and
V_IN = 0 to V_DD (Switch)
10
µV
250 1050 Ω
120 500 Ω
80
280 Ω
25
70 Ω
10
50 Ω
10
45 Ω
Off Channel Leakage Current
V_IN = V_IL or V_IH (Control) Channel to
I_OFF Channel or Any One Channel,
V_DD=15V
±0.05 ±100 nA
Capacitance, Switch I/O
C_I/O Inhibit = V_DD
10
pF
Capacitance, Common O/I
C_O/I Inhibit = V_DD
17
pF
Capacitance, Feedthrough
(Channel Off)
Pins Not Adjacent
C_{I/O Pins Adjacent}
0.15
pF
0.47
CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to V_SS)
V_DD=5V
2.25 1.5 V
Low Level Input Voltage V_DD=10V V_IL R_ON= per spec, I_OFF = per spec
4.50 3.0 V
V_DD=15V
6.75 4.0 V
V_DD=5V
3.5 2.75
V
High Level Input Voltage V_DD=10V V_IH R_ON= per spec, I_OFF = per spec
7.0 5.50
V
V_DD=15V
11 8.25
V
Input Leakage Current
I_LEAK V_IN= 0 or V_DD, V_DD=15V
±0.00001 ±0.1 µA
Input Capacitance
C_IN
5.0
7.5 pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-013.D