TL082 Datasheet, PDF (2/9 Pages) National Semiconductor (TI) – Wide Bandwidth Dual JFET Input Operational Amplifier

UTC TL082
BLOCK DIAGRAM
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25°C )
PARAMETER
Supply Voltage (note 1)
Input Voltage (note 2)
Differential Input Voltage (note 3)
Power Dissipation
Output Short-Circuit Duration (note 4)
Operating Free Air Temperature Range
Storage Temperature Range
SYMBOL
Vcc
Vi
Vid
Ptot
Toper
Tstg
VALUE
+-18
+-15
+-30
680
Infinite
0 to 70
-65 to 150
UNIT
V
V
V
mW
°C
°C
NOTES:
1. All voltage values, except differential voltage, are with respect to the zero reference level
(ground) of the supply voltages where the zero reference level is the midpoint between Vcc-
and Vcc+.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage
or 15 volts, whichever is less.
3. Differential voltages are at the non-inverting input terminal with respect to the inverting input
terminal.
4. The output may be shorted to ground or to either supply. Temperature and/or supply
voltages must be limited to ensure that the dissipation rating is not exceeded.
UTC UNISONIC TECHNOLOGIES CO., LTD. 2
QW-R105-019,A