H2P14UGTRW0100 Datasheet, PDF (2/11 Pages) Unictron Technologies Corporation – 5.0 x 3.0 x 0.5 GPS Ceramic Chip Antenna (AA095)

2. Features
*Stable and reliable in performances
*Low temperature coefficient of frequency
*Low profile, compact size
*RoHS compliance
*SMT processes compatible
3. Applications
*Navigation systems or position tracking systems
*Hand-held devices when GPS function is needed, e.g., PDA, Smart phone, PND.
4. Description
Unictron’s chip antenna series are ceramic antennas specially designed for GPS
application. Based on Unictron’s proprietary design and processes, this chip antenna
has excellent stability and sensitivity to consistently provide high signal reception
efficiency.
5. Electrical Specifications (80x40(mm) ground plane)
5-1.
Characteristics
Specifications
Unit
Outline Dimensions
5.0x3.0x0.5
mm
Ground Plane
80x40
mm
Center Frequency*
1575.42
MHz
Bandwidth (under -10dB return loss)
VSWR
50 min.
2 max.
MHz
Impedance
Polarization
50
Ω
Linear Polarization
Gain**
Peak
Efficiency
Temperature Coefficient
of Frequency
2.5 (typical)
84 (typical)
0±20 max
(@ -40℃~85℃)
dBi
%
ppm/℃
*Center frequency will be offset to working frequency according to the conditions of user’s ground plane and radome.
**The data was measured by A Test Lab Techno Corp.(CTIA Authorized Test Lab).
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit：mm
Prepared By : Meiping
Checked By : Herbert
Designed By : Mike
Approved By : Jeff
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
TITLE： 5.0 x 3.0 x 0.5 GPS Ceramic Chip
Antenna (AA095)
DOCUMENT
NO.
H2P14UGTRW0100
REV.
D
PAGE 2
OF 11