CHA4220-QGG_15 Datasheet, PDF (4/16 Pages) United Monolithic Semiconductors – 0.5-20GHz Driver

CHA4220-QGG
0.5-20GHz Driver
Device thermal performance
All the figures given in this section are obtained assuming that the QFN device is cooled
down only by conduction through the package thermal pad (no convection mode considered).
The temperature is monitored at the package back-side interface (Tcase) as shown below.
The system maximum temperature must be adjusted in order to guarantee that Tcase
remains below the maximum value specified in the next table. So, the system PCB must be
designed to comply with this requirement.
A derating must be applied on the dissipated power if the Tcase temperature cannot be
maintained below the maximum temperature specified (see the curve Pdiss. Max) in order to
guarantee the nominal device life time (MTTF).
The provided thermal information in the next chart is for the worst biasing point: Idq=110mA
and Vd=7V, without RF drive @Tcase=85°C.
Ref. : DSCHA4220-QGG-5070 - 11 Mar 15
4/16
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: [phone] - Fax: [phone]