English
Language : 

PRL1103D Datasheet, PDF (2/4 Pages) ULTRA LEVEL TECH CO., LTD. – AC-DC PFC MEDICAL SWITCHING POWER SUPPLY
ULTRA LEVEL TECH CO., LTD.
www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465
We Supply the Power Customers Need ISO9001
OUTPUT VOLTAGE / CURRENT RATING CHART: Measured at output power connector.
Model
Number
Output
Voltage
PRL1103Dx-0512
PRL1103Dx-1224
V1:+ 5V
V2:+ 12V
V1:+ 12V
V2:+ 24V
Max. Output Current
Type U (force air)
&E&F
24A
13.33A
13.33A
6.67A
Type U
(Convection)
12A
6.67A
6.67A
3.33A
Regulation
+/- 5%
+/- 5%
+/- 5%
+/- 5%
Ripple &
Noise
1%
1%
1%
1%
Note:
* PRL1103D series are designated as PRL1103Dx-y where x can be U (U-Chassis only), F (U-chassis with top cover and fan installed) or E
(Enclosed Type with rear side built-in fan) , y can be 0512, 1224.
* U Type: U-Chassis @240W max. with min. 25CFM forced airflow or 120W max. under air convection.
* E Type: Enclosed with rear side built-in fan @240W max.
* F Type: U-Chassis with top built-in fan @240W max.
* Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1µF ceramic and 22µF electrolytic capacitors.
* 10% minimum load is required to maintain the ripple and regulation.
* Output is fully isolated.
OUTLINE DRAWING:
Input Connector (CN1):
U and F Type: Mating JST Part No. VHR-5N or equivalent (5pin, 3 used), or Terminal Block: Howder M3 screws 3 pin 6.35mm center Part
No. HD-601-3P; PCB Labeling: L=Line; N=Neutral; G=Chassis Ground .
E Type: IEC320 snap-in mounting type or Terminal Block: Howder HD-602-3P.
Output Connector (CN2):
Howder
Molex
Mating JST Part No. VHR-8N
Terminal block – Howder M3 Part No. HD-816-3P
V1 : Pin 3
V1 : Pin 6~8
Output Pin Assignment:
(See table in right).
RTN : Pin 2
RTN : Pin 2~5
Mounting Inserts:
6 Places M3X0.7. Maximum Penetration 4mm sees outline drawing for location.
V2 : Pin 1
V2 : Pin 1
Logic signal connector (CN3):
Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04);
Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26. :
Fan driver connector (FAN1):
Mating connector is JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03).
Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice.