AP562_15 Datasheet, PDF (7/8 Pages) TriQuint Semiconductor – 3.3-3.8 GHz WiMAX 8W Power Amplifier

AP562
3.3-3.8 GHz WiMAX 8W Power Amplifier
Parameter Measurement Information
Switching Speed Test
Test Conditions:
Vcc = +12V at 25^oC
Output Power = +30dBm @ 2.5 GHz
Rep Rate = 1 KHz, 50% duty cycle
Vpd amplitude = +5V
R2=200 ohms, C9=12pF
(C10, C11 removed for best switching
performance)
Xtal Detector Voltage =15mV (square law)
CW Signal Source
Cable Length = Lx
Pulse Generator ^-ve
+ve
Oscilloscope
Cable Length = Lx
Vpd
Cable Length = Lx
Diode Detector
Attenuator
AP56x Evaluation Brd
Test Result Waveforms:
Vpd = +5V
Vpd = +0V
RF On
Vpd = +5V
RF Off
Delay = 50nS
Vpd = +5V
RF On
Delay = 50nS
Specifications and information are subject to change without notice
TriQuint Semiconductor, Inc • Phone [phone] • FAX: [phone] • e-mail: [e-mail] • Web site: www.TriQuint.com
Page 7 of 8 May 2009