English
Language : 

ML485-G_15 Datasheet, PDF (1/9 Pages) TriQuint Semiconductor – 1.5-3.2 GHz High IP3 Mixer with Integrated LO Amp
ML485
1.5-3.2 GHz High IP3 Mixer with Integrated LO Amp
Applications
• PCS / 3G Base station / Repeaters
• WCDMA / LTE
• WiMax / WiBro
• ISM / Fixed Wireless
• HPA Feedback Paths
Product Features
• High Dynamic Range Mixer
• Integrated LO Driver
• +35 dBm Input IP3
• 8 dB Conversion Loss
• RF: 1500 – 3200 MHz
• LO: 1400 – 3500 MHz
• IF: 50 – 300 MHz
• +5 V Supply at 40 mA
• 0 dBm Drive Level
• RoHS-compliant MSOP8 (14 mm2)
General Description
The ML485 high linearity converter combines a passive
GaAsFET mixer with an integrated LO driver in an ultra-
small lead-free/green/RoHS-compliant MSOP-8
package. The double-balanced integrated IC is able to
operate across a wide 1.5 – 3.2 GHz frequency range to
achieve +35 dBm Input IP3 while drawing a very low
40mA current. The ML485 can be used as an up-
converter or down-converter in a low-side or high-side
LO configuration.
A LO buffer amplifier is integrated on the chip to allow for
operation directly from a synthesizer requiring only 0
dBm of LO drive level. The dual-stage LO driver
provides a stable input power level into the mixer to
allow for consistent performance over a wide range of
LO power levels. The converter requires no external
baluns and supports a wide range of IF frequencies.
Typical applications include frequency up/down
conversion, modulation and demodulation for receivers
and transmitters used in 2.5G and 3G mobile
infrastructure. Due to the wide frequency range of
operation, the converter can also be used for WiMAX,
WiBro, ISM, LTE and fixed wireless applications
MSOP 8 Package
Functional Block Diagram
Pin 1 Reference Mark
LO 1
GND 2
GND 3
VCC 4
8 RF
7 GND
6 GND
5 IF
Backside Paddle - RF/DC GND
Pin Configuration
Pin No.
1
2, 3, 6, 7
4
5
8
Backside Paddle
Symbol
LO
GND
Vcc
IF
RF
GND
Ordering Information
Part No. Description
ML485-G 1.5 – 3.2 GHz Mixer w/ Integrated LO Amp
ML485-PCB Fully Assembled Evaluation Board
Standard T/R size = 1000 pieces on a 7” reel
Data Sheet Rev. D 07-22-14
© 2014 TriQuint
- 1 of 9 -
Disclaimer: Subject to change without notice
www.triquint.com