SUINT3000RTXL3U Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartOnline 200-240V 3kVA 2.4kW On-Line Double-Conversion UPS, Extended Run, SNMP,Webcard, 3U Rack/Tower, USB, DB9 Serial

SmartOnline 200-240V 3kVA 2.4kW On-Line
Double-Conversion UPS, Extended Run, SNMP,
Webcard, 3U Rack/Tower, USB, DB9 Serial
MODEL NUMBER: SUINT3000RTXL3U
Highlights
3000VA / 3kVA / 2400 watt
online, double conversion 3U
rack / tower UPS
200/220/230/240V 50/60Hz
output
Expandable runtime; Hot-swap
batteries; 19.8 in / 50.3cm
installed depth
RS232 & EPO ports; support for
SNMP/WEB card options
Front panel status LEDs with
detailed load and battery metering
2 independently switchable
output load banks
C20 inlet, C13 & C19 outlets, 1
C19 to C20 and 2 C13 to C14
power cables included
Description
Tripp Lite's SUINT3000RTXL3U UPS System offers complete power conditioning and battery support for critical
fileservers and internetworking equipment in a versatile 3U rack/tower configuration. Offers compatibility with
200/208/220/230/240V applications at 50/60Hz. Double conversion power conditioning process removes line
noise, voltage fluctuations and frequency variations by converting incoming AC to DC, then back to universally
compatible pure sine wave AC output. Standard internal batteries offer seamless support of connected
equipment during power failures with zero transfer time. Support through extended power failures is available
with the addition of 2U rack/tower compatible battery packs BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack
compatible) and BP72V18-2US (multi-pack compatible). Maintains continuous output over an input range of 160
to 275V without depleting battery reserves. Brownout support extends to 130V when loaded to 70% or less.
Intelligent DB9 monitoring port works with included PowerAlert software and cabling for unattended shutdown
and remote monitoring of UPS and site power conditions. Network accessory slot houses optional
SNMPWEBCARD accessory for direct control and monitoring via ethernet. Includes 10 outlets total, 8 of which
are arranged in two customized load management banks that can be remotely powered off and on via software
Package Includes
SUINT3000RTXL3U Rack/Tower
UPS System
PowerAlert Software and cabling
4 Post Rackmount installation
flanges and adjustable depth
mounting rails/or tower stands for
upright tower configuration
(2)6ft IEC320-C13 to
IEC320-C14, (1)10ft.
IEC320-C19 to IEC320-C20 AC
interconnection cables
Warranty information and
instruction manual
interface to reboot locked equipment or extend battery runtime for more critical equipment by shedding non-essential loads. C20 input connection accepts a
variety of detachable cordsets to match country- or site-specific wall receptacles. 3000VA/2400W power-handling ability with full CE rating and Class A
EMI/RFI rating supports a wide range of fileservers and internetworking equipment, plus other sensitive loads requiring full-time power conditioning, regulation
and battery support. Compatible with Tripp Lite's WatchDog system service software.
Features
True online, double-conversion power conditioning offers enhanced, network-grade pure sine wave AC power for critical fileservers, internetworking
equipment and sensitive electronics
Maintains output within 2% of selectable 200/208/220/230/240V at 50/60Hz (+/-0.05Hz)
Neutralizes frequency variations, fast electrical impulses, harmonics and other hard-to-solve power problems not addressed by other UPS types
Versatile rack/tower format requires only 3 rack spaces (3U) in rackmount applications; included tower stand set supports upright configuration
1/5