TMP86FH46BNG Datasheet, PDF (9/216 Pages) Toshiba Semiconductor – 8 Bit Microcontroller TLCS-870/C Series

TMP86FH46BNG
Differences in Electrical Characteristics (TMP86xx47 Series)
86C847 / 86CH47 / 86CM47
86CM47A
86PM47
86PH47
86CH47A
86FH47
86FH47A
86FH47B
[V]
5.5
4.5
2.7
Read/
1.8
Fetch
[V]
5.5
4.5
(a)
2.7
2.0
1.8
1 4.2 8 16 [MHz]
[V]
5.5
4.5
(a)
2.7
(b)
1.8
(Note1)
1 4.2 8 16 [MHz]
[V]
5.5
4.5
(a)
3.0
2.7
1.8
1 4.2 8 16 [MHz]
(a)
(b)
(Note2)
1 4.2 8 16 [MHz]
Operat-
ing con-
dition
(MCU
mode)
(a) 1.8V to 5.5V (-40 to 85 °C)
(a) 2.0V to 5.5V (-40 to 85 °C)
(b) 1.8V to 2.0V (-20 to 85 °C)
(a) 2.7V to 5.5V (-40 to 85 °C)
86FH47A
(a) 3.0V to 5.5V (-40 to 85 °C)
(b) 2.7V to 3.0V (-20 to 85 °C)
86FH47B
(a) 2.7V to 5.5V (-40 to 85 °C)
[V]
5.5
(a)
4.5
Erase/
Pro-
-
-
-
2.7
gram
1.8
1 4.2 8 16 [MHz]
(a) 4.5V to 5.5V (-10 to 40 °C)
Operating condition
(Serial PROM
-
mode)
[V]
[V]
5.5
5.5
(a)
(a)
4.5
4.5
-
2.7
2.7
1.8
1.8
2 4 8 16 [MHz]
2 4.2 8 16 [MHz]
Supply voltage
(Absolute Maxi-
mum Ratings)
Operating current
(a) 4.5V to 5.5V (20 to 30 °C) (a) 4.5V to 5.5V (-10 to 40 °C)
−0.3 ~ 6.5
86FH47A
(a)−0.3 ~ 6.5
86FH47B
(a)−0.3 ~ 6.0
Operating current varies with each product. For details, refer to the datacheet (electrical chracteristics) of each product.(Note4)
(Note3)
Note 1: With The 86CH47A, PH47 the operating temperature (Topr) is -20 °C to 85 °C when the supply voltage VDD is less
than 2.0V.
Note 2: With The 86FH47A, the operating temperature (Topr) is -20 °C to 85 °C when the supply voltage VDD is less than
3.0V.
Note 3: With The 86FH47A,86FH47B when a program is executing in the Flash memory or when data is being read from the
Flash memory, the Flash memory operates in an intermittent manner causing peak currents in the Flash memory mo-
mentarily, as shown in Figure. in this case, the supply current IDD(in NORMAL1,NORMAL2 and SLOW1 mode) is de-
fined as the sum of the average peak current and MCU current.
Note 4: About the measurement condition of supply current, V_IN level of TEST pin is deffrent between 86FH47B and the oth-
er 86xx47 series MCUs. The supply current is defined as follows; V_IN of TEST pin: V_IN ≤ 0.1V(86FH47B), V_IN ≤ 0.2V(oth-
ers) It is described in the section "Electrical characteristics" of TMP86FH47B in detail.