TLP2095 Datasheet, PDF (9/11 Pages) Toshiba Semiconductor – PHOTOCOUPLER GaAℓAs IRED & PHOTO-IC

3.3 Empty Device Recesses are as shown in Table 2.
Table 2 Empty Device Recesses
TLP2095
Occurrences of 2 or
more successive
empty device
recesses
Single empty device
recesses
Standard
0
6 devices (max) per
reel
Remarks
Within any given 40-mm section
of tape, not including leader
and trailer
Not including leader and trailer
3.4 Start and End of Tape
The start of the tape has 50 or more empty holes. The end of tape has 50 or more empty holes and two empty
turns only for a cover tape.
3.5 Tape Specification
(1) Tape material: Plastic (protection against electrostatics)
(2) Dimensions: The tape dimensions are as shown in Figure 2 and Table 3.
0.3 ± 0.05
φ1.5
+0.1
−0
G
A
K₀
3.15 ± 0.2
F
φ1.6 ± 0.1
Figure 2 Tape Forms
Symbol
A
B
D
E
F
G
K0
Table 3 Tape Dimensions
Dimension
4.2
Unit: mm
Unless otherwise specified: ±0.1
Remark
―
7.6
―
5.5
Centre line of indented square hole and sprocket hole
1.75
Distance between tape edge and hole center
8.0
Cumulative error
+0.1
-0.3
(max) per 10 feed holes
4.0
Cumulative error
+0.1
-0.3
(max) per 10 feed holes
2.8
Internal space
9
2009-08-11