TB62269FTG Datasheet, PDF (7/27 Pages) Toshiba Semiconductor – PWM method CLK-IN bipolar stepping motor driver

Output function of reset signal
The L_OUT pin will show “Low” level when an error occation(TSD/ISD) is detected.
VCC level
L_OUT
10kΩ
TB62269FTG
The LO is an open-drain output pin. LO pin needs to be pulled up to 3.3V/5.0V level for proper function. During regular operation,
the LO pin level will stay High(VCC level). When error detection (TSD, ISD) is applied, the LO pin will show Low (GND) level.
7
2014-3-18