|
TB62269FTG Datasheet, PDF (1/27 Pages) Toshiba Semiconductor – PWM method CLK-IN bipolar stepping motor driver | |||
|
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB62269FTG
TB62269FTG
PWM method CLK-IN bipolar stepping motor driver
The TB62269FTG is a two-phase bipolar stepping motor driver using a PWM chopper.
Fabricated with the BiCD process, the TB62269FTG is rated at 40 V/1.8 A .
The internal voltage regulator allows control of the motor with a single
VM power supply.
Features
⢠Drive control is possible in a bipolar stepping motor at 1 chip.
⢠PWM controlled constant-current drive
⢠Allows full, half and quarter ,1/8,1/16,1/32 step resolutions.
P-WQFN48-0707-0.50-003
⢠Low on-resistance of output stage transistor is low by using BiCD process.
⢠High Voltage and current (For specification, please refer to absolute
Weight:0.14g(Typ.)
maximum ratings and operation ranges)
⢠Thermal shutdown (TSD)ãover-current shutdown (ISD),
⢠and power-on reset of VM power supply (POR)
⢠Built-in regulator allows the TB62269FTG to function with only VM power supply.
⢠Able to customize PWM signal frequency by external resistance/capacitor.
⢠Packages TB62269FTG : (P-WQFN48-0707-0.50-003)
Note) Please be careful about thermal conditions during use.
1
2014-3-18
|
▷ |