TLP3107 Datasheet, PDF (3/9 Pages) Toshiba Semiconductor – Normally off (1-Form-A)

7. Recommended Operating Conditions (Note)
TLP3107
Characteristics
Symbol Note Min Typ. Max Unit
Supply voltage
V_DD


48
V
Input forward current
I_F
5
10
25
mA
ON-state current (A connection)
I_ON


3.3
A
Operating temperature
T_opr
-20

65

Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this datasheet should also be considered.
8. Electrical Characteristics (Unless otherwise specified, T_a = 25 )
Characteristics
LED Input forward voltage
Input reverse current
Input capacitance
Detector OFF-state current
Output capacitance
Symbol
V_F
I_R
C_t
I_OFF
C_OFF
Note
Test Condition
I_F = 10 mA
V_R = 5 V
V = 0 V, f = 1 MHz
V_OFF = 60 V
V = 0 V, f = 1 MHz
Min Typ. Max Unit
1.18 1.33 1.48
V


10
µA

70

pF


20
nA

700 1500 pF
9. Coupled Electrical Characteristics (Unless otherwise specified, T_a = 25 )
Characteristics
Symbol Note
Test Condition
Min Typ. Max Unit
Trigger LED current
I_FT
I_ON = 2.0 A
Return LED current
I_FC
I_OFF = 10 µA
ON-state resistance (A connection) R_ON (Note 1) I_ON = 2.0 A, I_F = 5 mA, t < 1 s
ON-state resistance (B connection)
ON-state resistance (C connection)
I_ON = 4.0 A, I_F = 5 mA, t < 1 s
Note 1: For an application circuit example, see Fig. 12.2.

0.2
3
mA
0.1



30
60
mΩ

15


8

10. Isolation Characteristics (Unless otherwise specified, T_a = 25 )
Characteristics
Symbol Note
Test Condition
Min Typ. Max Unit
Total capacitance (input to output)
Isolation resistance
Isolation voltage
C_S (Note 1) V_S = 0 V, f = 1 MHz
R_S (Note 1) V_S = 500 V, R.H. ≤ 60 %
BV_S (Note 1) AC, 1 min
AC, 1s in oil

0.8

pF
5 × 10¹⁰ 10¹⁴

Ω
1500

 Vrms

3000 
DC, 1 min, in oil

3000 
Vdc
Note 1: This device is considered as a two-terminal device: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6
are shorted together.
3
2013-09-19
Rev.1.0