TLCBD1060 Datasheet, PDF (3/9 Pages) Toshiba Semiconductor – LED Lamp

TLCBD1060(T18)
The cautions
- ESD withstand voltage according to MIL STD 883D, Method 3015.7 : ≥1000V
- When handling this LED, take the following measures to prevent the LED from being damaged or otherwise
adversely affected.
1) Use a conductive tablemat and conductive floor mat, and ground the workbench and floor.
2) Operators handling laser diodes must be grounded via a high resistance (about 1MΩ). A conductive strap is
good for this purpose.
3) Ground all tools including soldering irons.
- This product is designed as a general display light source usage, and it has applied the measurement standard that
matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light
source for sensor, optical communication and etc) except general display light source.
3
2009-05-19