TLP2631_07 Datasheet, PDF (2/8 Pages) Toshiba Semiconductor – Isolated Line Receiver

TLP2631
Absolute Maximum Ratings (no derating required up to 70°C)
Characteristic
Forward current (each channel)
Pulse forward current
(each channel)*
Reverse voltage (each channel)
Output current (each channel)
Output voltage (each channel)
Supply voltage
(1 minute maximum)
Output collector power
dissipation (each channel)
Operating temperature range
Storage temperature range
Lead soldering temperature
(10s)**
Isolation voltage
(AC, 1 min., R.H.≤ 60%, Note 3)
Symbol
I_F
I_FP
V_R
I_O
V_O
V_CC
P_O
T_stg
T_opr
T_sol
BV_S
Rating
20
30
5
16
−0.5~7
7
40
−55~125
−40~85
260
2500
Unit
mA
mA
V
mA
V
V
mW
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
* t ≤ 1 msec duration.
** 2mm below seating plane.
Recommended Operating Conditions
Characteristic
Input current, low level, each channel
Input current, high level, each channel
Supply voltage**, output
Fan out (TTL load, each channel)
Operating temperature
Symbol Min.
Typ.
Max.
Unit
I_FL
0
―
250
μA
I_FH
6.3*
―
20
mA
V_CC
4.5
5
5.5
V
N
―
―
8
T_opr
0
―
70
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
*6.3mA is a guard banded value which allows for at least 20% CTR degradation.
Initial input current threshold value is 5.0mA or less.
**This item denotes operating ranges, not meaning of recommended operating conditions.
2
2007-10-01