English
Language : 

TLP173A Datasheet, PDF (2/10 Pages) Toshiba Semiconductor – Telecommunications Control Equipment Data Acquisition System Security Equipment Measurement Equipment
TLP173A
Absolute Maximum Rating (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward current
Forward current derating (Ta ≥ 25°C)
Reverse voltage
LED Pulse forward current
(100 μs pulse, 100 pps)
Junction temperature
Off-state output terminal voltage
On-state current
Detector
Forward current derating (Ta ≥ 25°C)
Junction temperature
Storage temperature
Operating temperature
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 min, R.H. ≤ 60%) (Note 1)
IF
ΔIF/°C
VR
IFP
Tj
VOFF
ION
ΔION/°C
Tj
Tstg
Topr
Tsol
BVS
50
−0.5
5
1
125
60
70
−0.7
125
−55 to 125
−40 to 85
260
3750
mA
mA/°C
V
A
°C
V
mA
mA/°C
°C
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note: This product is more sensitive than conventional products to electrostatic discharge (ESD). It is therefore all
the more necessary to observe general precautions regarding ESD when handling this component.
Note 1: LED pins are shorted together. Detector pins are also shorted together.
Recommended Operating Conditions
Characteristics
Symbol
Min Typ. Max Unit
Supply voltage
Forward current
On-state current
Operating temperature
VDD
IF
ION
Topr
⎯
⎯
⎯
3
⎯
⎯
−20
⎯
48
V
25
mA
60
mA
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Electrical Characteristics (Ta = 25°C)
Characteristics
Forward voltage
LED Reverse current
Capacitance
Off-state current
Detector
Capacitance
Symbol
VF
IR
CT
IOFF
COFF
Test Condition
IF = 10 mA
VR = 5 V
V = 0, f = 1 MHz
VOFF = 60 V
VOFF = 0, f = 1 MHz
Min Typ. Max Unit
1.0 1.15 1.3
V
⎯
⎯
10
μA
⎯
30
⎯
pF
⎯
1 1000 nA
⎯
10
⎯
pF
2
2009-12-22