TLP130_07 Datasheet, PDF (2/9 Pages) Toshiba Semiconductor – Programmable Controllers

Absolute Maximum Ratings (Ta = 25°C)
TLP130
Characteristic
Symbol
Rating
Unit
Forward current
Forward current derating (Ta≥53°C)
Peak forward current (100μs pulse,100pps)
Junction temperature
Collector−emitter voltage
Collector−base voltage
Emitter−collector voltage
Emitter−base voltage
Collector current
Peak collector current (10ms pulse,100pps)
Power dissipation
Power dissipation derating (Ta≥25°C)
Junction temperature
Storage temperature range
Operating temperature range
Lead soldering temperature (10s)
Total package power dissipation
Total package power dissipation derating (Ta≥25°C)
Isolation voltage (AC, 1min., RH ≤ 60%)
I_F(RMS)
ΔI_F / °C
I_FP
T_j
V_CEO
V_CBO
V_ECO
V_EBO
I_C
I_CP
P_C
ΔP_C / °C
T_j
T_stg
(Note 1)
T_opr
T_sol
P_T
ΔP_T / °C
BV_S
50
−0.7
1
125
80
80
7
7
50
100
150
−1.5
125
−55~125
−55~100
260
200
−2.0
3750
mA
mA / °C
A
°C
V
V
V
V
mA
mA
mW
mW / °C
°C
°C
°C
°C
mW
mW / °C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4, 5 and 6 shorted
together.
Recommended Operating Conditions
Characteristic
Symbol
Min. Typ. Max. Unit
Supply voltage
Forward current
Collector current
Operating temperature
V_CC
―
5
48
V
I_F(RMS)
―
16
25
mA
I_C
―
1
10
mA
T_opr
−25 ―
85
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01