TLOH9204 Datasheet, PDF (2/10 Pages) Toshiba Semiconductor – ORANGE LIGHT EMISSION AF auxiliary light source for digital still cameras

TLOH9204
Electrical and Optical Characteristics (Ta = 25℃)
Characteristics
Symbol
Test Condition
Forward voltage
Reverse current
Luminous intensity(On-axis)(Note 3)
Peak emission wavelength
Spectrum half wavelength
Optical axis deviation (Note 3)
Half-angle value (Note 3)
V_F
I_F=20mA
I_R
V_R = 5 V
I_V
I_F=20mA
λp
I_F=20mA
⊿λ
I_F=20mA
⎯
I_F=20mA
θ1/2
I_F=20mA
Note 3: The standard surface of measurement is the shaded area in Figure 2.
Min
Typ.
Max Unit
⎯
2
2.4
V
⎯
⎯
50
μA
15
21
⎯
cd
⎯
612
⎯
nm
⎯
15
⎯
nm
⎯
⎯
3
゜
⎯
±4
⎯
゜
Precaution
• The TLOH9204 is intended for digital still camera use only. Please do not use the device for any other purpose.
• Do not apply any mechanical stress to the device while the device’s temperature is high.
• Soldering must be performed in the shaded area as shown in Figure 1 below.
• The recommended standard mounting surface for this LED is the shaded area shown in Figure 2 below.
Figure 1
Figure 2
Device appearance:
Since this device is cast in resin, air bubbles, cracks, etc. may occur due to variations in manufacture.
Please ask our sales section for details of appearance standards for the device.
(Examples of variations in device appearance)
Air bubbles: Spherical air bubbles inside the resin
Cracks : Linear crack in the package surface
2
2007-10-26