TLN210 Datasheet, PDF (2/4 Pages) Toshiba Semiconductor – INFRARED LIGHT-EMISSION DIODE FOR STILL CAMERA LIGHT SOURCE FOR AUTO FOCUS

TLN210(F)
Precautions
Please be careful of the followings.
1. Soldering temperature: 260°C max
Soldering time: 5s max
(Soldering must be performed 2mm from the bottom of the package.)
2. When forming the leads, bend each lead under the 2mm from the body of the device.
Soldering must be performed after the leads have been formed.
3. The TLN210(F) for a still camera AF use only. Please do not use this device except for a still camera.
2
2004-01-06