TCK104G Datasheet, PDF (2/12 Pages) Toshiba Semiconductor – Load Switch IC with Current Limit function

TCK104G,TCK105G
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Input voltage
V_IN
-0.3 to 6.0
V
Control voltage
V_CT
-0.3 to 6.0
V
Output voltage
V_OUT
-0.3 to V_IN +0.3
V
Output current
TCK104G
800
I_OUT
mA
TCK105G
1200
Power dissipation
P_D
800 (Note 1)
mW
Operating temperature range
T_opr
−40 to 85
°C
Junction temperature
Tj
150
°C
Storage temperature
T_stg
−55 to 150
°C
Note : Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e.
reliability test report and estimated failure rate, etc).
Note1: Rating at mounting on a board
(Glass epoxy board dimension: 40mm x 40mm, both sides of board
Metal pattern ratio: a surface approximately 50%, the reverse side approximately 50%
Through hole: diameter 0.5mm x 28)
Pin Assignment(Top view)
1
2
A
B
C
A1: V_OUT
B1: V_OUT
C1: GND
A2: V_IN
B2: V_IN
C2: CONTROL
Top marking
Index
Lot trace code
T: TCK104G
U: TCK105G
2
2014-03-01