SSM6K32TU Datasheet, PDF (2/6 Pages) Toshiba Semiconductor – Relay drive, DC/DC converter application

Switching Time Test Circuit
(a) Test Circuit
10V
IN
0
10 μs
(b) ) V_IN
OUT
V_DD ≒30 V
R_G = 50 Ω
Duty ^<= 1%
V_IN: t_r, t_f < 5 ns
Common Source
Ta = 25°C
(c) V_OUT
V_DD
10 V
0V
V_DD
V_{DS (ON)}
SSM6K32TU
10%
90%
90%
10%
t_r
t_f
t_on
t_off
Marking
654
Equivalent Circuit (Top View)
654
KNB
123
123
Precaution
V_th can be expressed as the voltage between gate and source when the low operating current value is I_D = 1 mA for
this product. For normal switching operation, V_{GS (on)} requires a higher voltage than V_th and V_{GS (off)} requires a lower
voltage than V_th.
(The relationship can be established as follows: V_{GS (off)} < V_th < V_{GS (on).})
Take this into consideration when using the device.
Handling Precaution
When handling individual devices that are not yet mounted on a circuit board, make sure that the environment is
protected against electrostatic discharge. Operators should wear antistatic clothing, and containers and other objects that
come into direct contact with devices should be made of antistatic materials.
2
2007-11-01