30GWJ2C42C_06 Datasheet, PDF (2/5 Pages) Toshiba Semiconductor – SWITCHING MODE POWER SUPPLY APPLICATON

MARKING
30GWJ2C
Characteristics
indicator
30GWJ2C42C
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
Abbreviation Code
30GWJ2C
Part No.
30GWJ2C42C
Handling Precaution
Schottky barrier diodes have reverse current characteristics compared to other diodes.
There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage.
Please take forward and reverse loss into consideration during design.
The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be
exceeded during operation, even for an instant. The following are the general derating methods that we recommend
when you design a circuit with a device.
V_RRM: Use this rating with reference to the above. V_RRM has a temperature coefficient of 0.1%/°C. Take
this temperature coefficient into account designing a device at low temperature.
I_O:
We recommend that the worst case current be no greater than 80% of the absolute maximum rating
of I_O and T_j be below 100°C. When using this device, take the margin into consideration by using an
allowable Tamax-I_O curve.
I_FSM: This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation,
which seldom occurs during the lifespan of the device.
T_j:
Derate this rating when using a device in order to ensure high reliability. We recommend that the
device be used at a T_j of below 100°C.
Please refer to the Rectifiers databook for further information.
2
2006-11-10