|
TA1318AFG Datasheet, PDF (17/42 Pages) Toshiba Semiconductor – SYNC Processor, Frequency Counter IC for TV Component Signals | |||
|
◁ |
Data Transmit Format 1
S Slave address
7 bit
MSB
S: Start condition
0A
Sub address
8 bit
MSB
A: Acknowledge
A Transmit data
8 bit
MSB
AP
P: Stop condition
Data Transmit Format 2
TA1318AFG
S Slave address 0 A Sub address A Transmit data A ・・・・・・
・・・・・・ Sub address A Transmit data n A P
Data Receive Format
S Slave address
7 bit
MSB
1 A Received data 1 A Received data 2 A P
8 bit
MSB
At the moment of the first acknowledge, the master transmitter becomes a master receiver and the slave
transmitter. This acknowledge is still generated by this slave.
The Stop condition is generated by the master.
(* important) The data read from THIS IC should always be completed in whole two words, not one word,
otherwise the IICBUS may cause error.
Optional Data Transmit Format: Automatic Increment Mode
S Slave address
7 bit
MSB
0A1
Sub address
7 bit
MSB
A Transmit data 1
8 bit
MSB
・・・・ Transmit data 2
8 bit
MSB
AP
In this transmission method, data is set on automatically incremented sub-address from the specified
sub-address.
I2C BUS Conditions
Characteristics
Low level input voltage
High level input voltage
Low level output voltage at 3 mA sink current
Input current each I/O pin with an input voltage
between 0.1 VDD and 0.9 VDD
Capacitance for each I/O pin
SCL clock frequency
Hold time START condition
Low period of SCL clock
High period of SCL clock
Set-up time for a repeated START condition
Data hold time
Data set-up time
Set-up time for STOP condition
Bus free time between a STOP and START condition
Symbol
VIL
VIH
VOL1
Ii
Ci
fSCL
tHD;STA
tLOW
tHIGH
tSU;STA
tHD;DAT
tSU;DAT
tSU;STO
tBUF
Min Typ. Max Unit
0
â¯
1.5
V
3.0
â¯
Vcc
V
0
â¯
0.4
V
â10 â¯
10
µA
â¯
â¯
10
pF
0
⯠100 kHz
4.0
â¯
â¯
µs
4.7
â¯
â¯
µs
4.0
â¯
â¯
µs
4.7
â¯
â¯
µs
280 â¯
â¯
ns
250 â¯
â¯
ns
4.0
â¯
â¯
µs
4.7
â¯
â¯
µs
17
2006-02-27
|
▷ |