TMP86CM27FG Datasheet, PDF (160/198 Pages) Toshiba Semiconductor – 8 Bit Microcontroller

13. 10-bit AD Converter (ADC)
13.2 Register configuration
TMP86CM27FG
EOCF AD conversion end flag
ADBF AD conversion BUSY flag
0: Before or during conversion
1: Conversion completed
0: During stop of AD conversion
1: During AD conversion
Read
only
Note 1: The ADCDR2<EOCF> is cleared to "0" when reading the ADCDR1. Therfore, the AD conversion result should be read to
ADCDR2 more first than ADCDR1.
Note 2: The ADCDR2<ADBF> is set to "1" when AD conversion starts, and cleared to "0" when AD conversion finished. It also is
cleared upon entering STOP mode or SLOW mode .
Note 3: If a read instruction is executed for ADCDR2, read data of bit3 to bit0 are unstable.
Page 150