TC62D722CFNG Datasheet, PDF (16/43 Pages) Toshiba Semiconductor – 16-Output constant current LED driver with the output gain control function and the PWM grayscale function

TC62D722CFG/CFNG
2-7-1) S6 command (Input of the state setting data (2).)
Operation) In the number of SCK pulses at TRANS="H" is 15 or 16, the following operation is executed.
The state setting data (2) in the 16-bit shift register is transmitted to the state setting register.
Basic input pattern of S6 command)
2-7-2) Input form of the state setting data (2)
MSB
LSB
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
C0 D0 E0 F0 G0 I0 J0 K0 M0 N0 -
-
-
-
-
-
D15 to D0 is serial-data-inputted at MSB first.
Please input "L" data to D5 to D0.
The state setting data (2) setting
Setting
bit
Outline of command
C0
Setting of
thermal shutdown function (TSD)
D0
Setting of
PWMCLK open detection function (POD)
E0
Setting of
output open detection function (OOD)
F0
Setting of
output short detection function (OSD)
G0
Setting of
PWM output synchronization
I0
Setting of
PWM output system
Setting of
J0
standby mode (2) function
This function becomes active only at the
time of the 16-bit PWM setting.
K0
Setting of
output short detection voltage
M0
Setting of
output delay function
N0
Setting of
SCK trigger of SOUT
Input data
0
1
Active
Not Active
Active
Not Active
Not Active
Active
Not Active
Active
Synchronous Asynchronous
Normal
output
Division
output
Not Active
Active
V_OSD1
Active
Up edge
trigger mode
V_OSD2
Not Active
Down edge
trigger mode
(Default)
Active
Active
Not Active
Not Active
Synchronous
Normal
output
Not Active
V_OSD1
Active
Up edge
trigger mode
16
2011-09-24