TMP86PM23UG Datasheet, PDF(121/214 Page) Toshiba Semiconductor

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

TMP86PM23UG Datasheet, PDF (121/214 Pages) Toshiba Semiconductor – 8 Bit Microcontroller

◁

TMP86PM23UG

Note 6: To the TimerCounter in the 16-bit mode, select the source clock by programming TC5CR<TC5CK>. Set the timer start

control and timer F/F control by programming TC6S and TFF6, respectively.

Note 7: The operating clock settings are limited depending on the timer operating mode. For the detailed descriptions, see Table

10-1 and Table 10-2.

Note 8: The timer register settings are limited depending on the timer operating mode. For the detailed descriptions, see Table 10-

Note 9: To use the PDO, PWM or PPG mode, a pulse is not output from the timer output pin when TC1CR2<TC6OUT> is set to 1.

To output a pulse from the timer output pin, clear TC1CR2<TC6OUT> to 0.

Table 10-1 Operating Mode and Selectable Source Clock (NORMAL1/2 and IDLE1/2 Modes)

Operating mode

8-bit timer

8-bit event counter

8-bit PDO

8-bit PWM

16-bit timer

16-bit event counter

Warm-up counter

16-bit PWM

16-bit PPG

fc/211

fc/27

fc/25

fc/23

fc/2

TC5

TC6

pin input pin input

fs/23

Note 1: For 16-bit operations (16-bit timer/event counter, warm-up counter, 16-bit PWM and 16-bit PPG), set its source clock on

lower bit (TC5CK).

Note 2: Î : Available source clock

Table 10-2 Operating Mode and Selectable Source Clock (SLOW1/2 and SLEEP1/2 Modes)