TLP268J Datasheet, PDF (10/13 Pages) Toshiba Semiconductor – Photocouplers GaAs Infrared LED and Photo Triac

TLP268J
Fig. 16.2 Insulation Related Specifications (Note)
Note:
Note:
If a printed circuit is incorporated, the creepage distance and clearance may be reduced below this value. (e.
g., at a standard distance between soldering eye centers of 3.5 mm). If this is not permissible, the user shall
take suitable measures.
This photocoupler is suitable for safe electrical isolation only within the safety limit data.
Maintenance of the safety data shall be ensured by means of protective circuits.
Fig. 16.3 Marking on packing
for EN60747
Fig. 16.4 Marking Example (Note)
Note: The above marking is applied to the photocouplers that have been qualified according to option (V4) of EN60747.
10
2015-03-13
Rev.5.0