TCS10NPU_14 Datasheet, PDF (1/6 Pages) Toshiba Semiconductor – TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10NPU
TCS10NPU
Digital-Output Magnetic Sensor
Feature
Push-Pull Output
North-Pole Detection
Marking
PA2
UFV
Weight: 7.0 mg (typ.)
Pin Assignment (top view)
V_CC (Note 1) GND2 (Note 2)
5
4
123
V_{OUT GND1 NC}
(Note 2)
Function Table
Magnetic Flux
Density
≥ B_ON
≤ B_OFF
Output
L
H
Note 1:
Note 2:
A 0.47μF capacitor should be connected near the device. This
condition will not guarantee successful operation. Check the
performance thorough evaluation using the actual application to set the
condition.
The GND1 and GND2 pins should be tied to ground. The GND2 pin is
used as a test pin during production.
Start of commercial production
2007-12
1
2014-03-01