TCS10DPU_14 Datasheet, PDF (1/6 Pages) Toshiba Semiconductor – TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TCS10DPU
TCS10DPU
Digital Output Magnetic Sensor
Feature
Push-Pull Output
South-Pole or North-Pole Detection
UFV
Weight: 7.0 mg (typ.)
Marking
PA3
Pin Assignment (top view)
Function Table
V_CC (Note 1) GND2 (Note 2)
5
4
Magnetic Flux
Density
≥ B_ON
≤ B_OFF
Output
L
H
123
V_OUT GND1 NC
(Note 2)
Note 1:
Note 2:
A 0.47μF capacitor should be connected near the device. This
condition will not guarantee successful operation. Check the
performance thorough evaluation using the actual application to set
the condition.
The GND1 and GND2 pins should be tied to ground.
The GND2 pin is used as a test pin during production.
Start of commercial production
2008-09
1
2014-03-01