TC74HC564AP_07 Datasheet, PDF (1/9 Pages) Toshiba Semiconductor – CMOS Digital Integrated Circuit Silicon Monolithic Octal D-Type Filp-Flop with 3-State Output

TC74HC564AP/AF,574AP/AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HC564AP,TC74HC564AF,TC74HC574AP,TC74HC574AF
Octal D-Type Filp-Flop with 3-State Output
TC74HC564AP/AF
Inverting
TC74HC574AP/AF
Non-Inverting
The TC74HC564A and HC574A are high speed CMOS OCTAL
FLIP-FLOPs with 3-STATE OUTPUT fabricated with silicon gate
C²MOS technology.
They achieve the high speed operation similar to equivalent
LSTTL while maintaining the CMOS low power dissipation.
These 8-bit D-type flip-flops are controlled by a clock input
(CK) and an output enable input ( OE ).
The TC74HC564A has inverting outputs, and the
TC74HC574A has non-inverting outputs.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Features
• High speed: f_max = 62 MHz (typ.) at V_CC = 5 V
• Low power dissipation: I_CC = 4 μA (max) at Ta = 25°C
• High noise immunity: V_NIH = V_NIL = 28% V_CC (min)
• Output drive capability: 15 LSTTL loads
• Symmetrical output impedance: |I_OH| = I_OL = 6 mA (min)
• Balanced propagation delays: t_pLH ^∼− t_pHL
• Wide operating voltage range: V_CC (opr) = 2 to 6 V
• Pin and function compatible with 74LS564/574
TC74HC564AP, TC74HC574AP
TC74HC564AF, TC74HC574AF
Weight
DIP20-P-300-2.54A
SOP20-P-300-1.27A
: 1.30 g (typ.)
: 0.22 g (typ.)
1
2007-10-01