|
TB6643KQ Datasheet, PDF (1/15 Pages) Toshiba Semiconductor – Full-Bridge DC Motor Driver IC | |||
|
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic
TB6643KQ
Full-Bridge DC Motor Driver IC
The TB6643KQ is a full-bridge DC motor driver IC employing
the MOS process for output power transistors.
The low ON-resistance MOS process and PWM control enables
driving DC motors with high thermal efficiency.
Four operating modes are selectable via IN1 and IN2: clockwise
(CW), counterclockwise (CCW), Short Brake and Stop.
Features
ï· Power supply voltage: 50 V (max)
ï· Output current: 4.5 A (max)
ï· Output ON-resistance: 0.55 ï (typ.)
ï· PWM control
ï· CW/CCW/Short Brake/Stop modes
ï· Overcurrent shutdown circuit (ISD)
ï· Overvoltage shutdown circuit (VSD)
ï· Thermal shutdown circuit (TSD)
ï· Undervoltage lockout circuit (UVLO)
ï· Dead time for preventing shoot-through current
Weight: 2.2 g (typ.)
TB6643KQ
Note: The following conditions apply to solderability:
About solderability, following conditions were confirmed
(1) Use of Sn-37Pb solder Bath
ï· solder bath temperature: 230°C
ï· dipping time: 5 seconds
ï· the number of times: once
ï· use of R-type flux
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
ï· solder bath temperature: 245°C
ï· dipping time: 5 seconds
ï· the number of times: once
ï· use of R-type flux
1
2011-06-21
|
▷ |