TB2996HQ Datasheet, PDF (1/24 Pages) Toshiba Semiconductor – Bi-CMOS Linear Integrated Circuit Silicon Monolithic

Bi-CMOS Linear Integrated Circuit Silicon Monolithic
TB2996HQ
Maximum Power 49 W BTL × 4ch Audio Power Amp IC
TB2996HQ
1. Description
The TB2996HQ is a power IC with built-in four-channel BTL
amplifier developed for car audio application. The maximum
output power POUT is 49 W using a pure complementary P-ch and
N-ch DMOS output stage.
In addition, a standby switch, a mute function, output offset
voltage detector and various protection features are included.
2. Applications
Power Amp IC developed for car audio applications.
Weight: 7.7 g (typ.)
3. Features
 High output power, low distortion, and low noise property (for details, refer to the Table 1 Typical
Characteristics).
• Built-in detecting output offset voltage and shorted to GND
(Pin25)
• Built-in muting function. (Pin22)
Table 1 Typical Characteristics
(Note1)
• Built-in auto muting functions (for low Vcc and stand-by
sequence)
Test condition
Typ.
Unit
• Built-in standby switch. (Pin4)
• Built-in 6v operation and start stop cruising circuit
• Built-in various protection circuits (thermal shut down,
over-voltage, short to GND, short to VCC, and output to output
short)
Output power (P_OUT)
V_CC = 15.2 V, JEITA max
49
V_CC = 14.4V, JEITA max
44
W
V_CC = 14.4V,THD = 10%
29
THD = 10%
24
Total harmonic distortion (THD)
P_OUT = 4 W
0.006
%
Output noise voltage (V_NO) (Rg = 0 Ω)
Filter : DIN AUDIO
50
µV
Operating Supply voltage range (V_CC)
RL = 4 Ω
RL = 2 Ω
6～18
V
6～16
Note1: Typical test conditions : V_CC = 13.2 V, f = 1 kHz, R_L = 4 Ω, GV = 26 dB, Ta = 25°C; unless otherwise specified.
Note2: Rg = signal source resistance
1
2013-11-21