TVP3010 Datasheet, PDF (9/91 Pages) Texas Instruments – Video Interface Palette

1.1 Features (TVP3010C and TVP 3010M)
• Second-Generation Video Interface Palette
• Supports System Resolutions of:
– 1600 × 1280 × 1, 2, 4, 8, 16 Bits/Pixel @ 60-Hz Refresh Rate
– 1280 × 1024 × 1, 2, 4, 8, 16 Bits/Pixel @ 60-Hz and 72-Hz Refresh Rate
– 1024 × 768 × 1, 2, 4, 8, 16, 24 Bits/Pixel @ 60-Hz and 72-Hz Refresh Rate
– And Lower Resolutions
• Direct-Color Modes:
– 24-Bit/Pixel With 8-Bit Overlay
– 16-Bit/Pixel (5, 6, 5) XGA Configuration
– 16-Bit/Pixel (6, 6, 4) Configuration
– 15-Bit/Pixel With 1-Bit Overlay (5, 5, 5, 1) TARGA Configuration
– 12-Bit/Pixel With 4-Bit Overlay (4, 4, 4, 4)
• True-Color Modes:
– 24-Bit/Pixel With Gamma Correction
– 16-Bit/Pixel (5, 6, 5) XGA Configuration With Gamma Correction
– 16-Bit/Pixel (6, 6, 4) Configuration With Gamma Correction
– 15-Bit/Pixel (5, 5, 5) TARGA Configuration With Gamma Correction
– 12-Bit/Pixel (4, 4, 4) With Gamma Correction
• RCLK /SCLK /LCLK Data Latching Mechanism to Allow Flexible Control of VRAM Timing
• Direct Interfacing to Video RAM
• Support for Split Shift Register Transfers
• Supports 64-Bit-Wide Pixel Bus
• On-Chip Hardware Cursor:
– 64 × 64 × 2 Cursor (XGA Functionally Compatible)
– Full-Window Crosshair
– Dual-Cursor Mode
• 85-,110-,135-, and 170-MHz Versions
• Supports Overscan for Creation of Custom Screen Borders
• Versatile Pixel Bus Interface to Support Little- and Big-Endian Data Formats
• Windowed-Overlay and VGA Capability
• Color-Keyed Switching of Direct Color and Overlay
• On-Chip Clock Selection
• Internal Frequency Doubler
• Triple 8-Bit D/A Converters
• Analog Output Comparators
• Triple 256 × 8 Color-Palette RAMs
• RS-343A Compatible Outputs
• Direct VGA Pass-Through Capability
• Palette-Page Register
• Horizontal Zooming Capability
• Software Downward Compatible With IMSG176/8 and Bt476/8
• Directly to Graphics Processors
• EPIC 0.8-µm CMOS Process
1–3