CC2560A Datasheet, PDF (9/52 Pages) Texas Instruments – Dual-Mode Bluetooth Controller

www.ti.com
CC2560A NRND; CC2564 NRND
CC2560A, CC2560B, CC2564, CC2564B
SWRS121E – JULY 2012 – REVISED JANUARY 2016
5 Specifications
Unless otherwise indicated, all measurements are taken at the device pins of the TI test evaluation board
(EVB). All specifications are over process, voltage, and temperature, unless otherwise indicated.
5.1 Absolute Maximum Ratings⁽¹⁾
Over operating free-air temperature range (unless otherwise indicated). All parameters are measured as follows:
VDD_IN = 3.6 V and VDD_IO = 1.8 V (unless otherwise indicated).
Supply voltage range
Input voltage to analog pins⁽²⁾
PARAMETERS
VDD_IN
VDDIO_1.8V
MIN
–0.5
–0.5
–0.5
MAX
4.8
2.145
2.1
UNIT
V ⁽¹⁾
V
V
Input voltage to all other pins
–0.5
VDD_IO
+ 0.5
V
Bluetooth RF inputs
Operating ambient temperature range, T_A(3)
Storage temperature range, T_stg
10 dBm
–40
85
°C
–55
125
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(1) Maximum allowed depends on accumulated time at that voltage: VDD_IN is defined in Section 7.1, Reference Design for Power and
Radio Connections.
(2) Analog pins: BT_RF, XTALP, and XTALM
(3) The reference design supports a temperature range of –20°C to 70°C because of the operating conditions of the crystal.
5.2 ESD Ratings
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
V_(ESD) electrostatic discharge _{Charged device model (CDM), per JEDEC specification JESD22- ±YYY V C101(2)}
VALUE
±500
±250
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
5.3 Power-On Hours
DEVICE
CC256x
CONDITIONS
Duty cycle = 25% active and 75% sleep
Tambient = 70ºC
5.4 Recommended Operating Conditions
POWER-ON HOURS
15,400 (7 Years)
RATING
Power supply voltage
I/O power supply voltage
High-level input voltage
Low-level input voltage
I/O input rise and all times,10% to 90% — asynchronous mode
I/O input rise and fall times, 10% to 90% — synchronous mode (PCM)
Voltage dips on VDD_IN (V_BAT)
duration = 577 μs to 2.31 ms, period = 4.6 ms
Maximum ambient operating temperature^{(1) (2)}
CONDITION
Default
Default
SYM
VDD_IN
VDD_IO
V_IH
V_IL
t_r and t_f
MIN
2.2
1.62
0.65 x VDD_IO
0
1
1
–40
MAX
4.8
1.92
VDD_IO
0.35 x VDD_IO
10
2.5
400
85
(1) The device can be reliably operated for 7 years at T_ambient of 85°C, assuming 25% active mode and 75% sleep mode (15,400
cumulative active power-on hours).
(2) A crystal-based solution is limited by the temperature range required for the crystal to meet 20 ppm.
UNIT
V
V
V
V
ns
ns
mV
°C
Copyright © 2012–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC2560A CC2560B CC2564 CC2564B
Specifications
9