MSP430G2955 Datasheet, PDF (8/72 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430G2955
MSP430G2855
MSP430G2755
SLAS800 – MARCH 2013
www.ti.com
Operating Modes
The MSP430 has one active mode and five software selectable low-power modes of operation. An interrupt
event can wake up the device from any of the low-power modes, service the request, and restore back to the
low-power mode on return from the interrupt program.
The following six operating modes can be configured by software:
• Active mode (AM)
– All clocks are active.
• Low-power mode 0 (LPM0)
– CPU is disabled.
– ACLK and SMCLK remain active.
– MCLK is disabled.
• Low-power mode 1 (LPM1)
– CPU is disabled
– ACLK and SMCLK remain active.
– MCLK is disabled.
– DCO's dc generator is disabled if DCO not used in active mode.
• Low-power mode 2 (LPM2)
– CPU is disabled.
– ACLK remains active.
– MCLK and SMCLK are disabled.
– DCO's dc generator remains enabled.
• Low-power mode 3 (LPM3)
– CPU is disabled.
– ACLK remains active.
– MCLK and SMCLK are disabled.
– DCO's dc generator is disabled.
• Low-power mode 4 (LPM4)
– CPU is disabled.
– ACLK, MCLK, and SMCLK are disabled.
– DCO's dc generator is disabled.
– Crystal oscillator is stopped.
8
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
Product Folder Links: MSP430G2955 MSP430G2855 MSP430G2755