DRV8803 Datasheet, PDF (8/26 Pages) Texas Instruments – QUAD LOW-SIDE DRIVER IC

PCB
www.ti.com
Figure 4. Jumpers/Resistors
1.4 Motor Outputs
There are two ways of connecting a bipolar stepper motor into the EVM: five pin header (J8), and five
position terminal block (J9). The optimal way to connect a DC motor is the two pin headers (J1/J2/J3/J4).
Although feasible, we do not recommend the connection of any motor into the test clips as these are
Kelvin connections and are not rated for high current output. All pins are labeled on the silk-screen for
clarity.
8
SLVU574A – September 2011 – Revised June 2012
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback