DRV8803 Datasheet, PDF (15/26 Pages) Texas Instruments – QUAD LOW-SIDE DRIVER IC

www.ti.com
The Windows Application
Figure 13. Schematic Window
3.6 DRV880x GPIO Control Signals
Once the application is communicating with the interface board, the control signals can be actuated by
clicking on pins to send each control hi (green), lo (red), or in special cases open (orange). Each tab will
have a different set of control signals depending on the device being interfaced with.
Functionality of control signals is identical across the platform. A green pin translates to a HI level on the
respective control signal, a red pin translates to a LO level on the respective control signals, and in special
cases, an orange pin translates to an open signal, and a gray pin translates to a non-control pin.
SLVU574A – September 2011 – Revised June 2012
15
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated