LM3S5C56 Datasheet, PDF (783/1146 Pages) Texas Instruments – Stellaris® LM3S5C56 Microcontroller

Stellaris^® LM3S5C56 Microcontroller
Bit/Field
4
3
2
1:0
Name
LBACK
SILENT
BASIC
reserved
Type
R/W
R/W
R/W
RO
Reset
0
Description
Loopback Mode
Value
0
1
Description
Loopback mode is disabled.
Loopback mode is enabled. In loopback mode, the data
from the transmitter is routed into the receiver. Any data
on the receive input is ignored.
0
Silent Mode
Value
0
1
Description
Silent mode is disabled.
Silent mode is enabled. In silent mode, the CAN controller
does not transmit data but instead monitors the bus. This
mode is also known as Bus Monitor mode.
0
Basic Mode
Value
0
1
Description
Basic mode is disabled.
Basic mode is enabled. In basic mode, software should
use the CANIF1 registers as the transmit buffer and use
the CANIF2 registers as the receive buffer.
0x0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
January 23, 2012
783
Texas Instruments-Production Data