SLUU763 Datasheet, PDF(7/12 Page) Texas Instruments

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SLUU763 Datasheet, PDF (7/12 Pages) Texas Instruments – bq2026 Evaluation Software

◁

www.ti.com

Count RefDes

bq2026EVM Circuit Module Performance Specification Summary

Table 2. Bill of Materials (continued)

Description

Size

bq2026, IC, 1.5K Serial EPROM With SDQ Interface SOT-23

MFR

Part Number

bq2026DBZR

6 bq2026EVM Circuit Module Performance Specification Summary

Table 3. Performance Specification Summary

Specification

Voltage Pullup (VUP)

Programming Voltage(VPP)

Min

Typ

Max

Unit

2.65

5.5

11.5

7 bq2026EVM Hardware and Software Setup

7.1 Drivers and Software Installation`

This section describes how to install the bq2026EVM PC software and how to connect the different

components of the EVM.

Perform the following steps to install the bq2026 evaluation software:

1. Insert the CD ROM into a CD ROM drive.

2. Select the CD ROM drive using My Computer or File Manager.

3. Select the ReadMeFirst.txt file.

4. Select the Software/EV2300 Drivers directory of the CD, and run SETUP.EXE.

5. Plug the EV2300 into a USB port.

6. Wait until system prompt new hardware found appears. Choose select location manually, and use the

browse button to point to C:\WINDOWS\TI\USB1.

7. Answer continue to the warning that drivers are not certified with Microsoft.

8. After installation finishes, another system prompt new hardware found appears. Repeat preceding

procedure, but point to C:\WINDOWS\TI\USB2.

9. Answer continue to the warning that drivers are not certified with Microsoft. Installation of drivers is

now finished.

10. For Windows 98, point to directory TIUSBWin98.

11. After installing the USB drivers for EV2300, double-click on the Setup.exe icon that is under the

Software/bq2026 Evaluation Software folder.

12. Follow the instructions on screen during the installation of evaluation software.

13. The setup program installs a Windows application group.

7.2 Hardware Connection

The bq2026EVM has three hardware components:

1. The bq2026EVM circuit module

2. The PC interface board, (EV2300)

3. The PC

Perform the following steps to configure the hardware for interface to the PC:

1. Connect the bq2026EVM board with the EV2300 PC interface board using Table 4 as a pin connection

guide.

2. Connect the USB cable to the EV2300 and the PC USB port.

The bq2026EVM is now set up for normal operation.

SLUU763 â December 2011

Submit Documentation Feedback

bq2026 Evaluation Software

▷