SLUU763 Datasheet, PDF (2/12 Pages) Texas Instruments – bq2026 Evaluation Software

Kit Contents
1 Kit Contents
1. bq2026EVM REVA board
2. Personal computer (PC) interface board EV2300
3. USB cable (type A-B)
www.ti.com
2 bq2026-Based Circuit Module
The bq2026-based circuit module is ideal for programming the 1.5K-bit EPROM and the STATUS bytes of
the bq2026 IC. The circuit module includes a SOT23 single socket, a bq2026 IC, a Zener diode for host
protection during EPROM programming, and a programming circuit that generates a 12-V pulse when
used with a power supply and a control signal. In a typical application, only the bq2026 IC and a pullup
resistor is required.
2.1 Test Points
Test Point
J1-1
J1-2
J1-3
J2-1
J2-2
J3
Table 1. Test Points
Signal Name
VSS
PROG
SDQ
12V
VSS
Description
Device ground
Input for timing of EPROM programming pulse
SDQ single-wire communication bus
High voltage for EPROM programming
Programming ground
Connect for EPROM programming
3 bq2026EVM Circuit Module Schematic
The schematic shows the circuit for the bq2026 implementation.
Figure 1. bq2026EVM Schematic
2
bq2026 Evaluation Software
Copyright © 2011, Texas Instruments Incorporated
SLUU763 – December 2011
Submit Documentation Feedback