SLAU330A Datasheet, PDF (7/36 Pages) Texas Instruments – MSP-EXP430F5529 Experimenter Board

User's Guide
SLAU330A – May 2011 – Revised June 2011
MSP-EXP430F5529 Experimenter Board
1 Getting Started
1.1 MSP-EXP430F5529 Experimenter Board Introduction
The MSP-EXP430F5529 Experimenter Board is a development platform based on the MSP430F5529 with
integrated USB. The Experimenter Board showcases the abilities of the latest family of MSP430s and is
perfect for learning and developing USB-based applications using the MSP430. The features include a
102x64 dot-matrix LCD, microSD memory card interface, 3-axis accelerometer, five capacitive-touch pads,
RF EVM expansion headers, nine LEDs, an analog thumb-wheel, easy access to spare F5529 pins,
integrated Spy-Bi-Wire flash emulation module, and standard full JTAG pin access. The kit is
pre-programmed with an out-of-box demo to immediately demonstrate the capabilities of the MSP430 and
Experimenter Board. This document details the hardware, its use, and the example software.
Figure 1. MSP-EXP430F5529 Experimenter Board
The MSP-EXP430F5529 Experimenter Board is available for purchase from the TI eStore:
https://estore.ti.com/MSP-EXP430F5529-MSP430F5529-Experimenter-Board-P2413C43.aspx
SLAU330A – May 2011 – Revised June 2011
MSP-EXP430F5529 Experimenter Board
7
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated