SLAU330A Datasheet, PDF (15/36 Pages) Texas Instruments – MSP-EXP430F5529 Experimenter Board

www.ti.com
Software Installation and Debugging
You may be prompted to update the firmware on the MSP-FET430UIF programmer. Do not be concerned;
click the button that says Update, and the program download should continue as expected.
NOTE: To begin developing your own application, follow these steps:
1. Download and install a supported IDE:
Code Composer Studio – Free 16KB IDE: www.ti.com/ccs
IAR Embedded Workbench KickStart – Free 8KB IDE: www.ti.com/iar-kickstart
2. Connect the MSP-EXP430F5529 Experimenter Board "eZ-FET" USB to the PC.
3. Download and debug your application.
SLAU330A – May 2011 – Revised June 2011
MSP-EXP430F5529 Experimenter Board
15
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated