DLPC900 Datasheet, PDF (67/72 Pages) Texas Instruments – Digital Controller for Advanced Light Control

www.ti.com
DLPC900
DLPS037A – OCTOBER 2014 – REVISED AUGUST 2015
Horizontal Front Porch (HFP) Blanking Number of blank pixel clocks after the last active pixel but before
Horizontal Sync.
Horizontal Sync (HS) Timing reference point that defines the start of each horizontal interval (line). The
absolute reference point is defined by the active edge of the HS signal. The active edge (either
rising or falling edge as defined by the source) is the reference from which all horizontal blanking
parameters are measured.
Total Lines Per Frame (TLPF) Defines the vertical period (or frame time) in lines: TLPF = Total number of lines
per frame (active and inactive).
Total Pixel Per Line (TPPL) Defines the horizontal line period in pixel clocks: TPPL = Total number of pixel
clocks per line (active and inactive).
Vertical Back Porch (VBP) Blanking Number of blank lines after vertical sync but before the first active line.
Vertical Front Porch (VFP) Blanking Number of blank lines after the last active line but before vertical sync.
Vertical Sync (VS) Timing reference point that defines the start of the vertical interval (frame). The absolute
reference point is defined by the active edge of the VS signal. The active edge (either rising or
falling edge as defined by the source) is the reference from which all vertical blanking parameters
are measured.
11.2 Documentation Support
11.2.1 Related Documentation
The following documents contain additional information related to the use of the DLPC900 device.
Table 23. Related Documents
DOCUMENT
DLP6500FLQ DMD Data Sheet
DLP6500FYE DMD Data Sheet
DLP9000 DMD Data Sheet
DLPC900 Programmer's Guide
DLP LightCrafter 6500 and 9000 EVM User's Guide
Reference Design Documentation
DOCUMENT LINK
DLPS040
DLPS053
DLPS036
DLPU018
DLPU028
DLPLCR6500
DLPLCR9000
11.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
11.4 Trademarks
LightCrafter, E2E are trademarks of Texas Instruments.
DLP is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
11.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Copyright © 2014–2015, Texas Instruments Incorporated
Product Folder Links: DLPC900
Submit Documentation Feedback
67