LM3S1162_16 Datasheet, PDF (615/683 Pages) Texas Instruments – Stellaris LM3S1162 Microcontroller

Stellaris^® LM3S1162 Microcontroller
Table 18-5. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
F3
VDD25
-
Power Positive supply for most of the logic function, including the
processor core and most peripherals.
F10
GND
-
Power Ground reference for logic and I/O pins.
F11
GND
-
Power Ground reference for logic and I/O pins.
F12
GND
-
Power Ground reference for logic and I/O pins.
PD0
I/O
TTL
GPIO port D bit 0.
G1
PWM0
O
TTL
PWM 0. This signal is controlled by PWM Generator 0.
PD1
I/O
TTL
GPIO port D bit 1.
G2
PWM1
O
TTL
PWM 1. This signal is controlled by PWM Generator 0.
G3
VDD25
-
Power Positive supply for most of the logic function, including the
processor core and most peripherals.
G10
VDD33
-
Power Positive supply for I/O and some logic.
G11
VDD33
-
Power Positive supply for I/O and some logic.
G12
VDD33
-
Power Positive supply for I/O and some logic.
PD3
I/O
TTL
GPIO port D bit 3.
H1
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PD2
I/O
TTL
GPIO port D bit 2.
H2
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
H3
GND
-
Power Ground reference for logic and I/O pins.
H10
VDD33
-
Power Positive supply for I/O and some logic.
H11
RST
I
TTL
System reset input.
H12
PF1
I/O
TTL
GPIO port F bit 1.
J1
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
J2
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
J3
GND
-
Power Ground reference for logic and I/O pins.
J10
GND
-
Power Ground reference for logic and I/O pins.
PF2
I/O
TTL
GPIO port F bit 2.
J11
PWM4
O
TTL
PWM 4. This signal is controlled by PWM Generator 2.
PF3
I/O
TTL
GPIO port F bit 3.
J12
PWM5
O
TTL
PWM 5. This signal is controlled by PWM Generator 2.
PG0
I/O
TTL
GPIO port G bit 0.
K1
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
PG1
I/O
TTL
GPIO port G bit 1.
K2
U2Tx
O
TTL
UART module 2 transmit. When in IrDA mode, this signal has IrDA
modulation.
K3
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
K4
NC
-
-
No connect. Leave the pin electrically unconnected/isolated.
K5
GND
-
Power Ground reference for logic and I/O pins.
K6
GND
-
Power Ground reference for logic and I/O pins.
K7
VDD33
-
Power Positive supply for I/O and some logic.
July 15, 2014
615
Texas Instruments-Production Data