English
Language : 

TCA9617B Datasheet, PDF (6/24 Pages) Texas Instruments – Level-Translating FM+ I2C Bus Repeater
TCA9617B
SCPS259A – DECEMBER 2014 – REVISED DECEMBER 2014
www.ti.com
7.6 Timing Requirements
VCCA = 0.8 V to 5.5 V, VCCB = 2.2 V to 5.5 V, GND = 0 V, TA = –40°C to 85°C (unless otherwise noted)(1)(2)(3)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TEST CONDITIONS
MIN TYP MAX UNIT
SDAB, SCLB SDAA, SCLA
42
55 90
tPLH
Propagation delay
tPHL
Propagation delay
SDAA, SCLA
SDAB, SCLB
SDAA, SCLA
SDAB, SCLB
SDAA, SCLA
SDAB, SCLB
VCCB ≤ 3 V
VCCB > 3 V
61
88 137 ns
61
94 250
69
93 144
ns
68
90 140
tTLH (4)
Transition
time
B side
A side
30%
70%
88
ns
37
tTHL
tsu,en
Transition
time
B side
A side
70%
Setup time, EN high before Start condition(5)
30%
5.40 6.41 13.8
ns
1.40 4.71 11.3
100
ns
(1) Times are specified with loads of 240 Ω ±1% and 400 pF ±10% on B-side and 240 Ω ±1% and 200 pF ±10% on A-side. Different load
resistance and capacitance alter the rise time, thereby changing the propagation delay and transition times.
(2) Times are specified with A-side signals pulled up to VCCA and B-side signals pulled up to VCCB.
(3) Typical values were measured with VCCA = 0.9 V and VCCB = 2.5 V at TA = 25°C, unless otherwise noted.
(4) TTLH is determined by the pull-up resistance and load capacitance.
(5) EN should change state only when the global bus and the repeater port are in an idle state.
7.7 Typical Characteristics
TA = 85 C
TA = 25 C
TA = -40 C
TA = -40 C
TA = 25 C
TA = 85 C
VCCA = 0.9 V
Port A IOL (mA)
VCCB = 2.2 V
Figure 1. Port A VOL vs IOL
VCCA = 0.9 V
Port B IOL (mA)
VCCB = 2.2 V
Figure 2. Port B VOL vs IOL
6
Submit Documentation Feedback
Product Folder Links: TCA9617B
Copyright © 2014, Texas Instruments Incorporated