OPA376-Q1_016 Datasheet, PDF (6/39 Pages) Texas Instruments – Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series

OPA376-Q1, OPA2376-Q1, OPA4376-Q1
SBOS549B – APRIL 2011 – REVISED JUNE 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_S = (V+) – (V–)
T_A
T_J
T_stg
Supply voltage
Signal input pin voltage⁽²⁾
Signal input pin current⁽²⁾
Output short-circuit current⁽³⁾
Operating temperature
Junction temperature
Storage temperature
MIN
(V–) – 0.5
–10
–40
–65
MAX
7
(V+) + 0.5
10
Continuous
125
150
150
UNIT
V
V
mA
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails must
be current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per AEC Q100-002⁽¹⁾
Charged-device model (CDM), per AEC Q100-011
VALUE
±4000
±1000
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_S = (V+) – (V–)
T_A
Supply voltage
Operating temperature
MIN
2.2 (±1.1)
–40
MAX
5.5 (±2.75)
150
UNIT
V
°C
6
Submit Documentation Feedback
Copyright © 2011–2016, Texas Instruments Incorporated
Product Folder Links: OPA376-Q1 OPA2376-Q1 OPA4376-Q1